3M Amoladora de troquel - Motor de acero de 0.5 HP - 4,000 RPM - Lijado, acabado y pulido - Herramienta neumática - Eje recto - Pinza de 1/4" - 28332

Lo más importante

Amoladoras de la marca 3M

• Marca: 3M
• Categoría: Amoladoras
• Calificación: 5,0/5
• Valoraciones: 1

Datos técnicos destacados

• Peso aproximado: 69.0 lb (31.3 kg).
• Calificación promedio de 5,0/5.
• 1 valoraciones visibles.
• Posición destacada en Esmeriladoras Eléctricas: #579.

Preguntas resueltas

Reseña del editor La amoladora 3M es una herramienta de eje recto ideal para aplicaciones de peso pesado como eliminación de material y nivelación de soldadura, y está diseñada para uso continuo con características que mejoran la comodidad y el control del operador. Se han añadido numerosas mejoras para mejorar la resistencia y durabilidad de la herramienta, mientras que las mejoras de mantenimiento y compatibilidad hacen que esta herramienta sea fácil de usar y mantener. From the Manufacturer The 3M™ Die Grinder 28332 is a straight-shaft tool for use when slower tool speed is desired. It has an efficient 0.5 hp motor and enhanced comfort features, and is ideal for medium-duty applications such as deburring, buffing, and polishing. For improved productivity, the gear reduction maintains motor speed and delivers the desired speed (4,000) on the collet end. This increases torque so that operators can complete tasks faster with less energy and still maintain abrasive efficiency. The precision-balanced steel motor reduces vibration and creates a lighter weight tool, while 3M™ Gripping Material on the handle further reduces vibration and enables a firm grip with less force. The adjustable directional exhaust allows airflow to be directed in any direction preferred, even toward the operator for cooling if desired. To prevent accidental starting, the grinder incorporates a safety lever throttle. Total length is 8-7/8" and Max RPM is 4,000 at 90 psi. A die grinder is a handheld power tool that runs spindle-mounted abrasives such as coated abrasives or nonwoven surface conditioning abrasives. Typical coated abrasive products that can be run on a die grinder include cartridge rolls for reaching tight corners and crevices, cross pads for sanding small internal diameters, and evenrun bands and flap wheels for sanding and polishing contours. Scotch-Brite ™ surface conditioning products typically used include radial bristle discs, combi wheels, and cross buffs for removing rust and debris from internal diameters of small cylinders. These are just a few of a multitude of products that can be run on a die grinder. The Die Grinder 28332 requires a clean lubricated air supply that will give a measured air pressure at the tool of 6.2 bar (90 psi) when the tool is running with the lever fully depressed so the maximum RPM is not exceeded. The tool can be run at lower pressures but should never be run higher than 6.2 bar (90 psi). If run at a lower pressure the performance of the tool is reduced. For pneumatic power to the tool, an approved 10 mm (3/8 inch) x 8 m (25 feet) maximum length airline is recommended. The tool must be connected to an airline system with an easily accessible air shut off valve. It is strongly recommended that an air filter, regulator, and lubricator (FRL) be used to supply clean, lubricated air at the correct pressure to the tool. An appropriate air pressure regulator must be used at all times while operating this tool when the supply pressure exceeds the marked maximum of the tool, 4,000 RPM. If such equipment is not used, the tool should be manually lubricated. For instructions on connecting the tool to the air supply and manually lubricating the tool, see the Instruction Manual. For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Abrasive Systems products, including a complete line of coated abrasives, microfinishing and microreplicated abrasives, and hardware accessories, provide the finishing touch for almost any surface modification application. The 3M brand, across thousands of products, represents consistency, superior quality, and value. In the Box: 3M™ Die Grinder 283329/16" x 3/4" WrenchInstruction Manual

Amoladora de troquel de eje recto diseñada para moler en áreas de difícil acceso El motor de 1 hp maneja fácilmente aplicaciones de peso pesado como la eliminación de stock La carcasa del motor de acero totalmente mecanizada proporciona resistencia y durabilidad Las llaves planas y la interfaz de sobremanguera permiten un mantenimiento y compatibilidad más fáciles con los accesorios Ideal para aplicaciones de servicio medio